Top Sales Free Shipping 5 Sq Meters Floor Heating Film 50CM*10M With Clamps Insulation Daub And Black Insulation Tap

Far Infrared Heating Films 5 Sq Meters — 50cm*10m with full accessories

Packing Include:

Floor Heating Film 50CM * 10M (5 Sq Meter);

Clamps * 12 pieces;

Water Proof Insulation Daub * 1 Roll;

Black Insulation Tap * 1 Roll.

Thermostat 309L * 1piece.

______________________________________________________________________

Infrared Electric Heating Film Specification Data:

Electric Heating Film Size:

Power consumption of heating film:

1, Electric film rated power is 220W/Square meter.

2, Means full loading: 0.2 kWh.

3, Paved area of 70% of the room can achieve heating requirements.

4, Installed electric film heating system, are relying thermostat control, intermittent work to make

the room temperature is maintained constant.

5, When the room reaches the set temperature, the thermostats will enter standby mode.

6, According to the test, when the outdoor temperature is -6 degrees Celsius,

the indoor temperature want to maintain at 20 degrees Celsius, under the control of the

thermostat, electric film per day per square meter of actual working time is 4-8 hours.

Saving essentials:

1). An electrical heating system of the room to do better warm insulation electric film actual working time will be shorter, thereby reducing power consumption. It is more conveninet than the boiler and more environmentally friendly.

2) Install thermostats in each room, separate control. Close heating film when no body in the room, thereby reducing the working area, to save power. It is the same principle with central air condition, but more conmfortable.

______________________________________________________________________

Attractive Feature: Safety – Environment Friendly – Silent.

______________________________________________________________________

Use Place: Home – Office – Hotel – Warehouse – Gym -Greenhouse…

______________________________________________________________________

My Favorite Heating Film Photos:

_____________________________________________________________________

Installation Method:

Please check the thermostat infomation through this link:

Please check the thermostat infomation through this link:

______________________________________________________________________

Installation Step Photos:

1, Preparing Accessories.

2, Take out the clamp, and wires.

3, Insert wires into clamp.

4, Use a tool to opened the film, find the copper strips.

5, Insert the cable inside of the film but near the copper strips

(For current transmit).

6, Mount the clamp on the film.

7, Fixed the clamp on the film.

8, Stick the waterproof insulation daub on the clamps.

9, Stick the black insulation tap on the insulation tap.

10, Stick the black insulation daub at copper strips (Another side).